Instruction manual

Prosilica GE Technical Manual V2.0.2
48
Camera interfaces
In 1, Out 1 external circuit example
The trigger circuit is connected to a Texas Instruments SN74ACT244PWR buffer/
driver inside the camera. Note that the trigger input signal is not terminated to
match the cable impedance.
Figure 32: Prosilica GE In 1, Out 1 external circuit
Caution

Input: The required trigger input current is less than 10 μA.
Output: The maximum sync output current is 24 mA.
MINI-SMB
MINI-SMB
OUT
IN
IN 1 (5 V TTL DRIVER)
OUT 1 (5 V TTL RECEIVER)
RG-174 COAX CABLE
RG-174 COAX CABLE
TRIGGER INPUT
OUT 1