Installation manual

AVT GigE Cameras Installation Manual V1.0.1
36
Modifying camera IP address
4. A new window opens. In the controller window, go to GigE/Persistent and pro-
vide the desired values.
5. Go to GigE/Configuration/IP Configuration Mode. Set IP Configuration Mode =
Persistent; and execute IP Configuration Apply command.
For PvAPI users
[Windows 7]
With the camera(s) connected to the host, run the IPConfig program. This
application is packaged with the GigE Sample Viewer download.
– Select the camera(s) you wish to alter, select Change.
– Select Use the following IP address.
– Enter desired IP address, subnet mask, and gateway.
Figure 23: Example - Setting fixed camera IP address in VIMBA viewer (Windows OS)
Figure 24: Setting fixed camera IP address using AVT IPConfig application