Instruction manual

Prosilica GE Technical Manual V2.1.0

Introduction

This Prosilica GE Technical Manual describes in depth the technical specifica-

tions of the Prosilica GE camera family including dimensions, feature overview,

I/O definition, trigger timing waveforms, and frame rate performance.

For information on software installation read the GigE Installation Manual. For

detailed information on camera features and controls specific to the Prosilica

GE refer to the GigE Features Reference and GigE Camera and Driver Attri-

butes documents.

Document history

www



Prosilica GE literature:

http://www.alliedvision.com/en/support/technical-

documentation/prosilica-ge-documentation

Version Date Remarks

V2.0.0 2011-Jul-14 New Manual - SERIAL status

V2.0.1 2013-Jul-05 • Renamed Camera IO signals

•Reworked Cleaning optics section

• Reworked the spectral plots and Frame rate vs.Height graphs

• Updated the RoHS directive

• Updated the exposure control values in the Specifications chapter

•Added Status LEDs section

• Updated the pixel format naming according to the GenICam naming con-

vention

• Added frame rate formulas in the Resolution and ROI frame rates chapter

• Added VIMBA SDK link in Additional references section

• Updated AVT recommended cabling to category 6 or higher in the Gigabit

Ethernet port section

• Added contact information for Allied Vision Technologies (Shanghai) Co.

Ltd.

• Updated the links to AVT GigE Installation Manual

•Added links to AVT GigE Camera and Driver Features document

to be continued on next page

Table 1: Document history