Specifications

Appendix
Bigeye Technical Manual V2.0.0
44
AcquisitionControl
AnalogControls
Feature Description
AcquisitionMode This feature controls the acquisition mode of the software. This
feature works independently (!) of the chosen camera mode
(Continuous, IOD hardware trigger, IOD hardware timer). It
describes how many frames should be acquired.
AcquisitionStart Starts the image acquisition of the camera.
AcquisitionStop Stops the image acquisition of the camera.
TriggerMode Modifies the trigger mode of the camera. When the trigger mode
is “Off”, the camera will generate frames independently. When
the trigger mode is “On” the camera is switched to the so called
IOD (image-on-demand) mode. In this mode the camera waits
for an external trigger signal or an timer pulse generated
internally. To control exposure and dark time, trigger mode must
be switched to “On”.
ExposureMode Start or stop the internal exposure signal timer.
ExposureTime This feature is used to set the Exposure time (in microseconds).
ExposureTimeAbs This feature is used to set the Exposure time (in microseconds).
ExposureTimeGranularity Exposure time granularity.
ExposureTimeAbsMs This feature is used to set the Exposure time (in milliseconds).
DarkTime This feature is used to set the Dark time (in microseconds).
DarkTimeAbs This feature is used to set the Dark time (in microseconds).
DarkTimeGranularity Dark time granularity.
DarkTimeAbsMs This feature is used to set the Dark time (in milliseconds).
Table 18: Camera standard feature: AcquisitionControl
Feature Description
Gain This feature controls the selected gain as a raw integer value.
Table 19: Camera standard feature: AnalogControls