Specifications

Introduction
Pearleye Technical Manual V2.3.0
8
Manual overview
This manual overview outlines the contents of each chapter of this manual.
•Chapter Contacting Allied Vision Technologies on page 5 lists AVT contact
data (phone numbers and URLs) for both:
– Technical information / ordering
– Commercial information
•Chapter Introduction on page 6 (this chapter) gives you the document his-
tory, a manual overview (short description of each chapter) and conven-
tions used in this manual (styles and symbols). Furthermore, you learn
how to get more information on how to install hardware, available AVT
software (incl. documentation) and where to get it.
•Chapter Conformity on page 12 gives you information about conformity of
AVT cameras (CE, FCC, RoHS).
•Chapter Specifications on page 13 lists camera details and measured spec-
tral transmission diagrams for each camera type.
•Chapter Camera dimensions on page 20 provides CAD drawings of stan-
dard housing models (2D drawings), tripod adapter and cross sections of
the mounts.
•Chapter Start-up on page 22 describes the first steps to get the camera
into operation: camera control signals and camera controls as well as
adjusting the image process.
continued from previous page
V2.2.0
[continued]
02 May 2012
[continued]
• Added limited life time of electromechanical shutter:
1 million control cycles: see Chapter Electromechanical
shutter (I) on page 43
• Reworked Chapter Temperature warning (T) on page 43
•Reworked Note about command reference in Chapter Show
help text (?) on page 64
• Reworked text and added diagram in Chapter Two-point
correction (A, B, E, J, K, N) on page 46
V2.3.0 2013-Mar-18 • Updated Advanced Parameters
• Updated RoHS (2002/95/EC) to RoHS (2011/65/EU)
• Updated Specifications -> Power requirements (inrush
current)
• Added „Surge“ warning
• Corrections derived from terminology alignment
• Change of font, necessary due to changes in typeface
Version Date Description
Table 1: Document history