Technical information

AVT GigE camera and driver features
AVT GigE Camera and Drivers Features V2.0.0
14
This document is a master document for all AVT GigE camera models and is NOT camera specific
AVT GigE camera and driver features
This chapter lists standard and advanced camera controls, as seen from the AVT
Vimba Viewer, for the following camera families:
Acquisition
This group of controls relates to image acquisition.
AcquisitionAbort [Command]
Software command to stop camera from receiving frame triggers and abort the
current acquisition. A partially transferred image will be completed.
AcquisitionFrameCount [Integer] R/W
Defines the number of frames to capture in a limited sequence of images. Used
with AcquisitionMode = MultiFrame and Recorder. In Recorder
mode, AcquisitionFrameCount cannot exceed StreamHoldCapac-
ity.
AcquisitionFrameRateAbs [Float] R/W
When TriggerSelector = FrameStart and either TriggerMode =
Off or TriggerSource = FixedRate, this control specifies the frame
rate. Depending on the exposure duration, the camera may not achieve the
frame rate set here.
AcquisitionFrameRateLimit [Float] R
The maximum frame rate possible for the current exposure duration and image
format.
–Bigeye G
–Mako G
–Manta
–Prosilica GB
–Prosilica GC
–Prosilica GE
–Prosilica GS
–Prosilica GT
–Prosilica GX
Range:[1–65535] Default: 1 Units: Frames
Range: [Camera dependent] Units: Frames per second
Range: [Camera dependent] Units: Frames per second