Technical information

GigE Camera and Drivers Features V3.0.0
82
GigE IR & scientific camera and driver features
This document is a master document for all Allied Vision GigE camera models and is NOT camera specific
Info
GevDeviceMACAddress [Integer] R
48-bit MAC address of the GVCP interface of the selected remote device.
DevicePartNumber [String] R/C
Manufacturer’s part number.
FirmwareVerBuild [Integer] R/C
Build information.
FirmwareVerMajor [Integer] R/C
Major part of the firmware version number (part before the decimal).
FirmwareVerMinor [Integer] R/C
Minor part of firmware version number (part after the decimal).
Stream
Info
GVSPFilterVersion [String] R/C
Version of the GVSP Filter driver.
Multicast
Multicast mode allows the camera to send image data to all hosts on the same
subnet as the camera. The host computer (or Vimba Viewer application
instance) that first enables multicast mode is the master, and controls all cam-
era parameters. All other hosts/instances are the monitors, and can view image
data only.
Display name: Device MAC address
Display name: GVSP Filter Version
Note

Most GigE switches support a maximum packet
size of 1500 in multicast mode.
Note

When using clients with Linux, you have to configure
the IP subsystem to process Multicast IP traffic.