Technical information

GigE Camera and Drivers Features V3.0.0

GigE IR & scientific camera and driver features

This document is a master document for all Allied Vision GigE camera models and is NOT camera specific

ImageCorrectionControl

DefectPixelCorrection

DPCDatasetActivate [Command]

Activates the dataset that is currently indexed by DPCDatasetSelector.

DPCDatasetActive [Integer] R

The index of the active data set, starting at 0. The maximum possible value of

DPCDatasetActive depends on the number of valid data sets in the cam-

era. The mapping of an index value to a specific correction data file may vary

from camera to camera or after correction data modifications.

Use the DPCDatasetSelector and corresponding features to retrieve

more information about the data sets.

DPCDatasetActiveDescription [String] R

Gives a short descriptive label to the data set that is currently active and

indexed by DPCDatasetActive.

DPCDatasetDescription [String] R

Gives a short descriptive label to the data set that is currently indexed by DPC-

DatasetSelector.

DPCDatasetSelector [Integer] R/W

Selects a data set for access. The maximum possible value of DPCDataset-

Selector depends on the number of valid data sets in the camera. The map-

ping of an index value to a specific correction data file may vary from camera to

camera or after correction data modifications.

DPCMode [Enum] R/W

Configures operation mode of the defect pixel correction.

NonUniformityCorrection

NUCDatasetActivate [Command]

Activates the data set that is currently indexed by the NUCDataSetSelec-

tor.

NUCDatasetActive [Integer] R

The index of the active data set, starting at 0. The maximum possible value

depends on the number of valid data sets in the camera. The mapping of an

index value to a specific correction data file may vary from camera to camera or

after correction data modifications. Use the NUCDatasetSelector and

corresponding features to retrieve more information about the data sets.

Range: [0 – Camera dependent]

Range: [0 – Camera dependent] Default: Camera dependent

Possible values: Off, On Default: On

Range: [0 – Camera dependent]