Technical information

GigE Camera and Drivers Features V3.0.0

GigE IR & scientific camera and driver features

This document is a master document for all Allied Vision GigE camera models and is NOT camera specific

GigE IR & scientific camera and driver

features

Goldeye G and Goldeye G Cool are short-wave infrared GigE cameras that pro-

vides comprehensive and advanced set of features for infrared imaging require-

ments. This chapter describes the standard and advanced camera controls, as

seen from the Vimba Viewer, for Goldeye G and Goldeye G Cool cameras using

the GenICam standard feature naming convention.

AcquisitionControl

This group of controls relates to image acquisition.

AcquisitionAbort [Command]

Software command to stop camera from receiving frame triggers and abort the

current acquisition. A partially transferred image will be completed.

AcquisitionFrameCount [Integer] R/W

Defines the number of frames to capture in a limited sequence of images. Used

with AcquisitionMode = MultiFrame and Recorder. In Recorder

mode, AcquisitionFrameCount cannot exceed StreamHoldCapac-

ity.

AcquisitionFrameRate [Float] R/W

When TriggerSelector = FrameStart and either TriggerMode =

Off or TriggerSource = FixedRate, this control specifies the frame

rate. Depending on the exposure duration, the camera may not achieve the

frame rate set here.

AcquisitionFrameRateLimit [Float] R

The maximum frame rate possible for the current exposure duration and image

format.

Range:[1–65535] Default: 1 Unit: Frames

Range: [Camera dependent] Unit: Frames per second