Specifications

Manual overview
This manual overview outlines the contents of each chapter of this manual.
•Chapter Contacting Allied Vision Technologies on page 6 lists AVT contact
data (phone numbers and URLs) for both:
– Technical information / ordering
– Commercial information
•Chapter Introduction on page 7 (this chapter) gives you the document his-
tory, a manual overview (short description of each chapter) and conven-
tions used in this manual (styles and symbols). Furthermore you learn
how to get more information on how to install hardware, available AVT
software (incl. documentation) and where to get it.
•Chapter Conformity on page 13 gives you information about conformity of
AVT cameras (CE, FCC, RoHS).
•Chapter Specifications on page 14 lists camera details and measured spec-
tral transmission diagrams for each camera type.
•Chapter Camera dimensions on page 23 provides CAD drawings of stan-
dard housing models (2D drawings), tripod adapter and cross sections of
the mounts.
•Chapter Start-up on page 31 describes the first steps to get the camera
into operation: camera control signals and camera controls as well as
adjusting the image process.
•Chapter Camera interfaces on page 37 describes the control junction (I/O
pin assignment), inputs / outputs and trigger features.
•Chapter Image processing on page 54 describes the function of the
Goldeye P-.../Goldeye CL-... firmware. It is related to the individual
modules of image processing and shows in what way the user can control
these modules via the serial interface.
•Chapter Basic parameters and commands on page 59 describes the basic
configuration options and general commands available for the user, being
important for the operation of an ex factory preconfigured camera. Most
probably the information stated here will be sufficient for most of the
users.
•Chapter Advanced parameters and commands on page 63 describes the
advanced configuration of the Goldeye P-.../Goldeye CL-... models. For
the control of an ex factory set up camera the intervention within the
parameters stated here or rather the use of the mentioned commands is
only necessary in exceptional cases.
• The appendix: Chapter Command reference on page 76 describes the
general command reference of the Goldeye P-.../Goldeye CL-... firmware.
•Chapter Index on page 94 gives you quick access to all relevant data in
this manual.