Installation manual

TurboStack Hubs with Management

❑ Three types of network management capability:

— SNMP

— Via ASYNC ASCII terminal port (Omega)

— Telnet (Omega)

❑ Software upgrade through firmware cassette or in-band

downloading

❑ Hot swapping of modules in chassis

❑ Comprehensive diagnostic LED support

❑ Storage of up to 300 addresses per hub module

❑ Updates to the MAC address table are effected dynamically in

Learning Mode or manually by the user.

❑ Inventory management through storage of multiple addresses on

MAC address table

❑ Security feature to handle intrusions when secure mode locks MAC

address table

Hubs with

Management

Table 1 shows the various models of manageable TurboStack hubs with

management capability. You can mix any combination of these models in a

department concentrator chassis for maximum ﬂexibility. Subsequent

chapters of this manual describe the individual model types in detail,

including faceplate design, connection type and LED displays.

Table 1: TurboStack Hubs with Management

Model Number

Port

Count

Media/Connector Type

AT-TS06F/ST 6 Fiber Optic (10BASE-FL) with Straight Tip (ST)

Connectors

AT-TS06F/SC 6 Fiber Optic (10BASE-FL) with Subscriber Channel(SC)

Connectors

AT-TS06F/SM 6 Fiber Optic (10BASE-FL) with Sub Miniature Assembly

(SMA) Connectors

AT-TS08 8 Thinnet (10BASE2) with Bayonet Nut Couple (BNC)

Connectors

AT-TS12F/ST 12 Fiber Optic (10BASE-FL) with Straight Tip (ST)

Connectors

AT-TS12F/SC 12 Fiber Optic (10BASE-FL) with Subscriber Channel (SC)

Connectors

AT-TS12F/SM 12 Fiber Optic (10BASE-FL) with Sub Miniature Assembly

(SMA) Connectors

AT-TS12T 12 UTP (10BASE-T) with Telco 50-pin (RJ21) Connector

AT-TS12TR 12 UTP (10BASE-T) with RJ45 Connectors

AT-TS24T 24 UTP (10BASE-T) with two Telco 50-pin (RJ21)

Connectors

AT-TS24TR 24 UTP (10BASE-T) with RJ45 Connectors