User manual

2
If you use an external transceiver for a backbone connection, the transceiver
should be connected to an AUI appliqué on the hub faceplate. Figure 1 shows the
factory-installed AUI connector and plastic cover provided with all TurboStack
hubs.
Figure 1: AUI Network Connector
Network Appliqués
If the network backbone is 10BASE2, 10BASE-T or fiber optic (10BASE-FL), an
appliqué can be used instead of an external transceiver. Table 2 lists the available
TurboStack appliqué options.
Table 2: Appliqué List
Model Connector Type Description
AT-TSA1 SMA 10BASE-FL
AT-TSA2 SC 10BASE-FL
AT-TSA3 ST 10BASE-FL
AT-TSA5 AUI 10BASE5
AT-TSA8 BNC 10BASE2
AT-TSA9 RJ45 10BASE-T