User`s guide

AT-S10 Management Software User’s Guide

To update a specific hub:

1. Select Send updated software to another hub from the

Administration menu.

The following screen appears:

2. Enter either the hub’s IP address, MAC address, or name.

3. The activity monitor appears, displaying messages about the download

process.

To update all hubs:

Perform this procedure during those times when the network is not busy.

Select Update software in all hubs from the

Administration menu.

The hub sends a broadcast message to all TurboStack hubs,

informing them about the download, then turns on the activity

monitor. All hubs running an older version of the software respond

by requesting the updated software, and you see the messages on

the monitor as each hub requests and then receives the updated

software; for example:

The numbers 00000 and 99999 are the beginning and ending

addresses, respectively, of the portion of memory currently being

downloaded.

Sunnyvale

Please specify the Hub to be downloaded:

The Hub to be downloaded may be identified by name (‘hub name’), by

IP address (128.2.3.4), or by Ethernet address (0000F4 123456).

Activity Monitor

(hit Return to resume the previous menu)

Download request received from Third Floor Hub

Sending...: 00000 - 99999

Load completed