User`s guide

Management Menus

When conﬁguring network parameters for the hub, the software warns

you if you enter a wrong address format. You must then press Return to go

back to the Network parameters screen.

Hub IP Address. Enter A to display the Hub IP address screen as

shown:

Then enter the IP address for the hub.

CAUTION

All modules in the chassis inherit this address. This may result in

duplicate IP addresses if you use one of the modules as a standalone hub in

the future. Remember to change that hub’s IP address when it becomes a

standalone hub.

Subnet Mask . Enter B to display the Subnet mask screen as shown:

Then enter the Subnet mask if any.

Gateway Address. Enter C to display the Gateway address screen as

shown:

Then enter the address of the default gateway (router) to be used by the

hub when transmitting packets to another network or subnetwork.

Sunnyvale

The current Hub IP Address is:

Null (not currently configured)

Please enter a new value, or Return to retain the existing one.

Enter a value in the form of a.b.c.d, where a, b, c, and d are each in

the range 0-255. For example: 128.9.3.1

Sunnyvale

The current Subnet Mask is:

Null (not currently configured)

Please enter a new value, or Return to retain the existing one.

Enter a value in the form of a.b.c.d, where a, b, c, and d are each in

the range 0-255. For example: 255.255.255.0

Sunnyvale

The current Gateway Address is:

Null (not currently configured)

Please enter a new value, or Return to retain the existing one.

Enter a value in the form of a.b.c.d., where a, b, c, and d are each in

the range 0-255. For example: 128.9.3.1