User`s guide

Management Menus

As primary port, Port 13 is enabled and actively receives and transmits

packets. Port 1 is disabled until Port 13 fails. A secondary port’s port

conﬁguration screen may be similar to the following example (partially

shown):

Press Return to go to the Port Status screen and to view the port list,

which may be similar to the following example:

As you can see on the Port Status screen sample, redundant pair

conﬁguration writes over any previously-assigned port names. This

enables you to see what ports you have paired together. If you want to

change the name, it may be a good idea to use a name that also maintains

their redundancy function (see “Change Port Name” on page 19 for the

procedure).

NOTE

The software allows you to manually change the status of a redundant port.

However, checks performed by the redundant link feature may

immediately change the status again.

You are done with redundant pair conﬁguration. You may proceed with the

physical connections from your redundant ports to the network resource.

Sunnyvale

Module 1 — Accounting A

Port 1 - Secondary port ->13

Link State:Online

Partitioning State:Disabled/RL

Polarity:Normal

Sunnyvale

Module 1—Accounting A

Port Status

Port MAC Address Link Status MAC Learning

1: Secondary port->13 -- Online Disabled/RL Disabled

2: Room 1149 0000F4 C02789 Online Normal Enabled

3: Room 1150 0000F4 D0D070 Online Normal Enabled

4: Room 1151 00805F 84239F Online Normal Enabled

5: 00805F 4810F2 Online Normal Enabled

6: 000094 4514A6 Online Normal Enabled

7: 00805F E49A0B Online Normal Enabled

8: 080009 984673 Online Normal Enabled

9: 0000F4 D09603 Online Normal Enabled

10: 0000F4 C00520 Online Normal Enabled

11: 080020 681B97 Online Normal Enabled

12: 0080C7 68A081 Online Normal Enabled

13: Primary port->1 -- Online Normal/RL Disabled

Enter a port number to change a port’s configuration

- or hit Return to continue with no changes

Redundant

pair