Specifications
Table Of Contents
- AR Router Hardware Reference
- Copyright
- Contents
- Introduction
- Models Covered By This Reference
- Where To Find More Information
- Using Windows Terminal and Windows Hyperterminal
- Router Start-up
- Online Documentation
- AT-TFTP Server
- Memory
- AR300 Series Routers
- AR400 Series Routers
- AR700 Series Routers
- AT-RPS 740
- Mini Accelerator Cards (MACs)
- PCI Accelerator Cards (PACs)
- Flash Memory
- Interfaces
- Test Facility
- Cables And Loopback Plugs
- PICs and NSMs
- Restricted Procedures
- Contacting Us
8 AR Router
C613-03058-00 REV A
3. In the Phone Number dialog box:
From the “Connect using:” drop-down list, select:
•“Direct to Com n” Where “COM n” is the COM port on the PC used to
connect to the router.
• Click “OK”.
4. In the COMn Properties dialog box, set:
• “Bits per second” to 9600.
• “Data bits” to 8.
•“Parity” to None.
• “Stop bits” to 1.
• “Flow control” to Hardware.
• Click “OK”.