Specifications

78 AR Router
C613-03058-00 REV A
Figure37: Pin wiring diagram for an RS-232 DCE transition cable to an AMPLIMITE
50-way connector.
D50 SCSI-2 Male
(to router)
D25 Female
(to DTE)
Cable Shield
Insulating
Sheath
Notes:
(1) → Output from router; ← Input to router.
(2) Use shielded cable with twisted pairs, e.g. UL2789 28AWG. Twisted pairing must be
1-26, 2-27, 3-28, etc.
(3) D25 connector shells to be metallised and fully shielded 360°.
(4) Standard cable length is 2.05m ± 0.05m.
(5) Ferrite must be fitted to cable no more than 25mm from rear of D50 SCSI-2 backshell.
(6) Cable version 4.0.
1 Shield
2 TD (103)
3 RD (104)
4 RTS (105)
5 CTS (106)
6 DSR (107)
7 SG (102)
8 CD (109)
15 TC (114)
17 RC (115)
20 DTR (108)
Connect to backshell
← RD 2
→ TD 12
← CTS 3
→ RTS 14
→ DTR 13
SG 1
→ RL 15
→ TCG 20
← DSR 4
FGND 21
FSELA 22
Pin 26 Pin 50
Pin 1 Pin 25
D50 SCSI-2 Male — Pin View
Pin 25 Pin 14
Pin 13 Pin 1
D25 Female — Pin View
Ferrite
Cable
A50R232C