Specifications

Hardware Reference 67
C613-03058-00 REV A
To stop the test, use the command:
DISABLE CFLASH TEST
To display the testing process while a test is in process, enter:
SHOW CFLASH TEST
Figure 34 on page 67 shows a sample output.
Figure34: Output from the SHOW CFLASH TEST command, when a test is running.
If used when testing is not active, the previous command displays blank
cluster ranges on a compact flash card (Figur e33 on page 66).
Error messages are displayed when a file write fails. Failure could be due to the
card being removed or an error in the card.
Interfaces
Where applicable, all routers in the AR router family share common interface
types. For example, the pinout of the synchronous interface on the AT-AR350 is
the same as those on the AT-AR023 SYN PIC. The general description of each
interface type is given in this section, therefore, applies to all AR router models
and PICs.
Asynchronous Interfaces
Asynchronous interfaces use DB9 female connectors, DB9 male connectors, or
RJ-45 connectors, depending on the model or PIC (Table 26 on page 67).
Pinouts match those used for most building wiring schemes (Table 27 on page
68, Table 28 on page 68, Table 29 on page 69).
Test Progress
Starting cluster = 700
Ending cluster = 1700
Current cluster = 1185
Passed clusters number = 485
Passed sectors number = 1940
Failed clusters number = 0
Failed sectors number = 0
Used Clusters encountered = 0
Duration................ 4417 ms
Table 26: Asynchronous interface connectors by model.
Router Model/Option Connector Pinouts
AT-AR300L(S)
AT-AR300(S)
AT-AR310(S)
AT-AR410
AT-AR410S
DB9 female Table 27 on page 68