Specifications

Hardware Reference 41
C613-03058-00 REV A
In addition, the AT-AR725 router has a dedicated PAC slot, which can
accommodate the following PACs:
■
AT-AR060 EPAC, Encryption PAC.
■
AT-AR061 ECPAC, Compression/Encryption PAC.
Front and Rear Panels
The AT-AR725 router’s front and rear panels (with a PIC installed in each PIC
bay) are shown in Figure 17 on page 41.
Table 19 on page 42 lists functions of the AT-AR725’s LEDs. Additional rear
panel LEDs may be present if PICs are installed. Functions of LEDs on PICs are
described in the Port Interface Card Quick Install Guide and Port Interface Card
Hardware Reference.
Figure17: Front and rear panels of the AR725 Series router.
Asynchronous
ports
Power switch
AC Power inlet
Mac engine LEDs
and Base LEDs
Ethernet Ports
and LEDs
Base LEDs
Two PIC bays with PICs installed
DC Power inlet for RPS
Rear Panel
Front Panel
Compact Flash
725FRP
Data
ETH
Link
Data
ETH
Link
AC POWE R
100-240 VAC
50-60 Hz
1.0 A
5V/5.5A
12V/1.0A
-12V/0.1A
RPS DC POWER
L/A L/A
100M
ETHERNET 1
ENGINE
ACT
PWR
DAT
RUN
ER
SYS
CLR
SEC
PORT 1 PORT 0
PIC 0
BASE
PIC 1
PIC 0
100M
PIC 1
ETHERNET 0
DISCONNECT POWER BEFORE INSTALLING/REMOVING PIC
STATUS
SECURITYPOWER RUN SYSTEM CLEAR
AR725
Enterprise Router
ACTIVITY
COMPACT FLASH