Specifications

110 AR Router
C613-03058-00 REV A
Figure70: Example output from the SHOW INSTALL command.
Troubleshooting
If the router fails to reboot or functions incorrectly, then the most likely cause is
that there is a problem with the way the boot EPROMs were installed. Repeat
the procedure. Check that the boot EPROMs are in the correct locations and
oriented correctly, using the relevant location diagram as a guide. Check for
bent pins. These should be carefully straightened. Replace the boot EPROMs
and complete the remaining steps.
If the router still fails to reboot, replace the new boot EPROMs with the original
set and contact your distributor or reseller.
Contacting Us
With locations covering all of the established markets in North America, Latin
America and Europe, Allied Telesyn provides localized sales and technical
support worldwide. To find our representative nearest you, visit Allied Telesyn
on the web at: http://www.alliedtelesyn.com
.
Install Release Patch
------------------------------------------------------------
Temporary - -
Preferred flash:load\8-181.rez -
Default EPROM (8-1.8.1) -
------------------------------------------------------------
Current install
------------------------------------------------------------
Preferred flash:load\8-181.rez -
------------------------------------------------------------
Install history
------------------------------------------------------------
No Temporary install selected
Preferred install selected
Preferred release successfully installed
------------------------------------------------------------