Specifications

Chapter 18 - sipUAGroup Parameters MIB Reference Manual - SIP MIB
VP500 Communication Unit 61
sipUAServerGroup The following parameters allow you to set basic information pertaining
to the SIP server configuration.
sipUAServer-
StaticGroup
The following parameters allow you to set static information pertaining
to the SIP servers.
sipUAServerD-
hcpGroup
The following parameters allow you to set DHCP information for the
SIP servers.
Table 71: sipUA Server Group Parameters
Name Acccess Description Dynamic
sipUAServerOutboundProxyEnable R/W Not implemented ... for future use only.
0 = Disable
1 = Enable
Default Value: 0
N/A
sipUAServerUseDhcp R/W Select the provenance of the SIP server configuration.
0 = Static
1 = DHCP
Default Value: 1
Yes
a
a. Only when at least one of the variables xxUseDhcp was set to 1 before starting the VP500 unit.
Table 72: sipUA Server Static Group Parameters
Name Acccess Description Dynamic
sipUAServerStaticRegistrarHost R/W Static SIP registrar server IP address or domain name.
Default Value: 192.168.0.10
Yes
sipUAServerStaticRegistrarPort R/W Static SIP registrar server IP port number.
Default Value: 5060
Yes
sipUAServerStaticProxyHost R/W Static SIP proxy server IP address or domain name.
Default Value: 192.168.0.10
Yes
sipUAServerStaticProxyPort R/W Static SIP proxy server IP port number.
Default Value: 5060
Yes
sipUAServerStaticOutboundProxyHost R/W Not implemented ... for future use only.
---------------------------------------
Static SIP outbound proxy server IP address or domain name.
Default Value: 192.168.0.10
N/A
sipUAServerStaticOutboundProxyPort R/W Not implemented ... for future use only.
---------------------------------------
Static SIP outbound proxy server IP port number.
Default Value: 5060
N/A
Table 73: sipUA Log Group Parameters
Name Acccess Description Dynamic
sipUAServerDhcpRegistrarVendorSpecificCo
de
R/W DHCP SIP registrar server vendor specific code.
Default Value: 203
Yes