Specifications
Table Of Contents
- MIB Structure
- InterfaceGroup Parameters
- apaManager Parameters
- apaUIGroup Parameters
- gatewayGroup Parameters
- countryGroup Parameters
- portGroup Parameters
- syslogGroup Parameters
- tftpGroup Parameters
- apaByPassGroup Parameters
- apaSystemGroup Parameters
- apaCmdGroup Parameters
- snmpGroup Parameters
- apaInfoGroup Parameters
- configTrapGroup Parameters
- sntpGroup Parameters
- mgcpConfiguration Parameters
- sipUAGroup Parameters
- List of MIB Parameters
Chapter 18 - sipUAGroup Parameters MIB Reference Manual - SIP MIB
VP500 Communication Unit 60
sipUALogGroup The following parameters allow you to set parameters pertaining to the
SIP logging client.
sipUALogStat-
icGroup
The following parameters allow you to set static information pertaining
to the SIP logging client.
sipUALogDh-
cpGroup
The following parameters allow you to set DHCP information for the
SIP logging client.
Table 68: sipUA Log Group Parameters
Name Acccess Description Dynamic
sipUALogEnable R/W Enable the SIP logging client (allow the stack to log SIP packets).
0 = Disable
1 = Enable
Default Value: 0
Yes
sipUALogUseDhcp R/W Select the provenance of the SIP logging client configuration.
0 = Static
1 = DHCP
Default Value: 1
Yes
a
a. Only when at least one of the variables xxUseDhcp was set to 1 before starting the VP500 unit.
Table 69: sipUA Log Static Group Parameters
Name Acccess Description Dynamic
sipUALogStaticHost R/W Static SIP logging client IP address or domain name.
Default Value: 192.168.0.10
Yes
sipUALogStaticPort R/W Static SIP logging client IP port number.
Default Value: 6000
Yes
Table 70: sipUA Log Group DHCP Parameters
Name Acccess Description Dynamic
sipUALogDhcpVendorSpecificCode R/W DHCP SIP logging client vendor specific code.
Default Value: 202
Yes
sipUALogDhcpHost R-O Logging client IP address or domain name provided by the DHCP
server.
Default Value: 192.168.0.10
N/A
sipUALogDhcpPort R-O Logging client IP port number provided by the DHCP server.
Default Value: 6000
N/A