Specifications

Chapter 17 - mgcpConfiguration Parameters MIB Reference Manual - MGCP MIB
VP500 Communication Unit 55
mgcpConfigura-
tionLinePackage-
Group
The following parameters allow you to set information pertaining to the
line package.
mgcpStatusGroup
Parameters
The MGCP Status parameters represent the actual status of the Media
Gateway Control Protocol (MGCP).
Table 63: Line Package Parameters
Name Access Description Dynamic
mgcpConfigurationLinePackageBzDuration R/W Busy tone timeout value in ms.
Default Value: 30000
No
mgcpConfigurationLinePackageDlDuration R/W Dial tone timeout value in ms.
Default Value: 16000
No
mgcpConfigurationLinePackageRgDuration R/W Ring tone timeout value in ms.
Default Value: 180000
No
mgcpConfigurationLinePackageSlDuration R/W Stutter dial tone timeout value in ms.
Default Value: 16000
No
mgcpConfigurationLinePackageOtDuration R/W Off hook warning tone timeout value in ms.
Default Value: 65535000
No
Table 64: MGCP Status Parameters
Name Access Description Dynamic
mgcpStatusProtocolVersion R-O Version of the MGCP protocol.
Default Value: N/A
N/A
mgcpStatusStackVersion R-O Version of the MGCP stack.
Default Value: N/A
N/A
mgcpStatusCallAgentAddress R-O The address of the Call Agent to which the unit is currently
registered.
Default Value: 0.0.0.0
N/A
mgcpStatusCallAgentPortNumber R-O Port number of the Call Agent.
Default Value: 0
N/A
mgcpStatusRegistered R-O Unit status
0 = NOT REGISTERED - The unit has not been able to
successfully register with the call agent.
1 = REGISTERED - The unit is registered with the call agent
whose IP address is in mgcpStatusCallAgentAddress.
Default Value: 0
N/A
mgcpStatusEndpointIdGatewayFqdn R-O Fully Qualified Domain Name (FQDN).
Default Value: N/A
N/A