Specifications

Chapter 17 - mgcpConfiguration Parameters MIB Reference Manual - MGCP MIB
VP500 Communication Unit 52
mgcpConfigura-
tionEpIdGroup
The following parameters allow you to set information pertaining to
endpoints.
mgcpConfigura-
tionCallAgent-
Group
The following parameters allow you to set information pertaining to call
agents.
mgcpConfigu-
rationCallA-
gentStaticGrou
p
Table 56: End Point Id Parameters
Name Access Description Dynamic
mgcpConfigurationEpIdLocalNameTerm1 R/W String that specifies the term of the endpoint name.
Default Value: aaln
No
mgcpConfigurationEpIdGatewayFqdnUseDns R/W Select the provenance of the Fully Qualified Domain Name
(FQDN).
0 = Static
1 = DNS
Default Value: 0
No
mgcpConfigurationEpIdStaticGatewayFqdn R/W Static Fully Qualified Domain Name (FQDN) of the unit. No
Table 57: Call Agent Parameters
Name Access Description Dynamic
mgcpConfigurationCallAgentUseDhcp R/W Select the provenance of the Call Agent configuration.
0 = Static
1 = DHCP
Default Value: 1
No
Table 58: Call Agent Static Group
Name Access Description Dynamic
mgcpConfigurationCallAgentStaticPrimary
Address
R/W Primary static Call Agent address. Can be a dotted IP string or a
FQDN address.
Default Value: 192.168.0.10
No
mgcpConfigurationCallAgentStaticPrimary
PortNumber
R/W Primary static Call Agent UDP port number.
Default Value: 2727
No
mgcpConfigurationCallAgentStaticSecondary
Address
R/W Secondary static Call Agent address. Can be a dotted IP string or
a FQDN address.
Default Value: 192.168.0.10
No
mgcpConfigurationCallAgentStaticSecondary
PortNumber
R/W Secondary static Call Agent UDP port number.
Default Value: 2727
No