Specifications
Table Of Contents
- MIB Structure
- InterfaceGroup Parameters
- apaManager Parameters
- apaUIGroup Parameters
- gatewayGroup Parameters
- countryGroup Parameters
- portGroup Parameters
- syslogGroup Parameters
- tftpGroup Parameters
- apaByPassGroup Parameters
- apaSystemGroup Parameters
- apaCmdGroup Parameters
- snmpGroup Parameters
- apaInfoGroup Parameters
- configTrapGroup Parameters
- sntpGroup Parameters
- mgcpConfiguration Parameters
- sipUAGroup Parameters
- List of MIB Parameters
VP500 Communication Unit 43
15
configTrapGroup Parameters
This chapter describes the traps messages that can be sent from the
VP500 communication unit to the Unit Manager.
Config Trap
Parameters
The Trap Info parameters give you information on the traps
(messages) sent from the VP500 communication unit to the Unit
Manager.
Table 49: Config Trap Parameters
Name Access Description Dynamic
configTrapApaConfigInformation N/A The Unit Manager is trapped with the SIP Analog Gateway ID, the
MAC address and the request configuration of the VP500
communication unit (the unit requests a configuration from the
Unit Manager).
N/A
configTrapApaStatusInformation N/A The Unit Manager is trapped with the MAC address and the
configuration mode of the VP500 communication unit (the unit
confirms its configuration mode modification).
N/A
configTrapApaStatusConfigFile N/A The Unit Manager is trapped with the MAC address and the
config file download status.
N/A