Specifications
Table Of Contents
- MIB Structure
- InterfaceGroup Parameters
- apaManager Parameters
- apaUIGroup Parameters
- gatewayGroup Parameters
- countryGroup Parameters
- portGroup Parameters
- syslogGroup Parameters
- tftpGroup Parameters
- apaByPassGroup Parameters
- apaSystemGroup Parameters
- apaCmdGroup Parameters
- snmpGroup Parameters
- apaInfoGroup Parameters
- configTrapGroup Parameters
- sntpGroup Parameters
- mgcpConfiguration Parameters
- sipUAGroup Parameters
- List of MIB Parameters
VP500 Communication Unit 33
10
apaByPassGroup Parameters
The APA Bypass Group is used to set information on the System
Failure Bypass line connector, which is used as an emergency line in
case of power or LAN failure.
apaByPassGroup
Parameters
The following parameters are used to set up the behavior of the Bypass
connector.
Table 42: VP500 Bypass Group Parameters
Name Access Description Dynamic
apaByPassModeAlwaysEnable R/W Always enable VP500 communication unit bypass mode.
0 = Disable
1 = Enable
Default Value: 0
Yes
apaByPassModeLanFailEnable R/W Enable VP500 communication unit bypass mode on a LAN
failure.
0 = Disable
1 = Enable
Default Value: 0
Yes
apaByPassModeServerFailEnable R/W Enable VP500 communication unit bypass mode on a server
connection failure.
0 = Disable
1 = Enable
Default Value: 0
Yes