Specifications

VP500 Communication Unit 31
9
tftpGroup Parameters
The TFTP Group parameters allow you to set up the VP500
communication unit with the information pertaining to the server on
which the software update is located.
tftpGroup Basic
Parameters
The following parameters allow you to set basic information on the
software update server.
tftpServerStatic-
Group
The following parameters allow you to set static information on the
TFTP server.
Table 39: tftp Group Parameters
Name Access Description Dynamic
tftpFileName R/W VP500 communication unit software file name to download from
TFTP server.
Default Value: apa.bin
Yes
tftpEmergencyFileName R/W Emergency VP500 communication unit software file name to
download when the Rescue application starts.
Default Value: apa_emergency.bin
Yes
tftpUseDhcp R/W Select the provenance of the TFTP server configuration.
0 = Static
1 = DHCP
Default Value: 1
Yes
a
tftpTimeOut R/W Connection time-out value.
Default Value: 30
Yes
tftpBlockSize R/W Default block size.
Default Value: 1024
Yes
tftpDownloadStatus R-O TFTP VP500 communication unit software file download status.
0 = Idle
1 = Success
2 = Fail
3 = In Progress
4 = Abort
Default Value: 0
N/A
a. Only when at least one of the variables xxUseDhcp was set to 1 before starting the VP500 unit.
Table 40: tftp Server Static Group Parameters
Name Access Description Dynamic
tftpServerStaticHost R/W Static TFTP server IP address or domain name.
Default Value: 192.168.0.10
Yes
tftpServerStaticPort R/W Static TFTP server IP port number.
Default Value: 69
Yes