Specifications

Chapter 7 - portGroup Parameters MIB Reference Manual - Provisioning MIB
VP500 Communication Unit 25
portnDspCoun-
trySpecific-
Group
portnDspCountrySpecificGainGroup
portnDspCo-
decGroup
portnDspUserGainOutputOffset R/W Port #n user output gain offset in dB.
Default Value: -6
No
Table 26: DSP User Gain Parameters (Continued)
Name Access Description Dynamic
Table 27: DSP Country Specific Parameter
Name Access Description Dynamic
portnDspCountrySpecificLoopCurrent R/W Port #n country specific loop current.
Default Value: 30
No
Table 28: DSP Country Specific Gain Parameters
Name Access Description Dynamic
portnDspCountrySpecificGainConfiguration R/W Select port #n country specific gain configuration.
0 = Use custom configuration
1 = Use default country configuration
Default Value: 1
No
portnDspCountrySpecificGainBaseInput R/W Port #n country specific base input gain.
Default Value: 3648
No
portnDspCountrySpecificGainBaseOutput R/W Port #n country specific base output gain.
Default Value: 3029
No
portnDspCountrySpecificGainBaseInputOffset R/W Port #n coutry specific base input gain offset in dB.
Default Value: 0
No
portnDspCountrySpecificGainBaseOutputOffs
et
R/W Port #n country specific base output gain offset in dB.
Default Value: 0
No
Table 29: DSP Codec Parameter
Name Access Description Dynamic
portnDspPreferredCodec R/W Select preferred port #n codec.
0 = G.711 u-Law (PCMU)
1 = G.711 a-Law (PCMA)
2 = G.723.1
3 = G.729.AB
Default Value: 0
Yes