Specifications
Table Of Contents
- MIB Structure
- InterfaceGroup Parameters
- apaManager Parameters
- apaUIGroup Parameters
- gatewayGroup Parameters
- countryGroup Parameters
- portGroup Parameters
- syslogGroup Parameters
- tftpGroup Parameters
- apaByPassGroup Parameters
- apaSystemGroup Parameters
- apaCmdGroup Parameters
- snmpGroup Parameters
- apaInfoGroup Parameters
- configTrapGroup Parameters
- sntpGroup Parameters
- mgcpConfiguration Parameters
- sipUAGroup Parameters
- List of MIB Parameters
VP500 Communication Unit 21
6
countryGroup Parameters
The Country Group parameters allow you to set information pertaining
to the physical location of the VP500 communication unit.
Country Parame-
ters
The country parameters allow you to define information that will be
used when dialing.
Table 23: Country Group Parameters
Name Access Description Dynamic
countryCountryCode R/W Country code associated to the current location of the VP500
communication unit.
Default Value: 1
Yes
countryAreaCode R/W Area code associated to the current location of the VP500
communication unit.
Default Value: 819
Yes
countrySelection R/W Select the default country that may be used for configuration.
0 = Use Custom Configuration
1 = North America 1
2 = North America 2
3 = Austria
4 = France
5 = Germany 1
6 = Germany 2
7 = UK
8 = Italy
9 = Spain
10 = Switzerland
11 = Sweden
12 = Australia
13 = Japan
Default Value: 1
No
countryForceConfiguration R/W If the value is set to 1, every custom configuration selection will
be overridden by the selected country configuration in
countrySelection.
0 = Do not override
1 = Override any custom configuration selection
Default Value: 1
No