Specifications

Chapter 5 - gatewayGroup Parameters MIB Reference Manual - Provisioning MIB
VP500 Communication Unit 20
gatewayPerm-
LongDistDiffC-
CGroup
The following parameters allow you to set gateway permissions when
making a Long Distance Call in a different country.
gatewayPermLongDistDiffACAllowed R/W Semi-colon separated list of numbers allowed to be called on port
used in FXO mode (the destination call is long distance with a
different area code than countryAreaCode).
Default Value:
Yes
gatewayPermLongDistDiffACAllowAll R/W Select which numbers are allowed to be called on port used in
FXO mode.
0 = Only numbers in field
gatewayPermLocalSameACAllowed
1 = All numbers (The destination call is long distance with a
different area code than countryAreaCode)
Default Value: 0
Yes
Table 21: Gateway Perm Long Distance Different AC Parameters (Continued)
Name Access Description Dynamic
Table 22: Gateway Perm Long Distance Different CC Parameters
Name Access Description Dynamic
gatewayPermLongDistDiffCCPrefix R/W Prefix that must be dialed before the destination number. The
field is empty when no prefix is required (the destination call is
long distance with a different country code than
countryCountryCode).
Default Value:
Yes
gatewayPermLongDistDiffCCAllowed R/W Semi-colon separated list of numbers allowed to be called on port
used in FXO mode (the destination call is long distance with a
different country code than countryCountryCode).
Default Value:
Yes
gatewayPermLongDistDiffCCAllowAll R/W Select which numbers are allowed to be called on port used in
FXO mode.
0 = Only numbers in field
gatewayPermLocalSameACAllowed
1 = All numbers (The destination call is long distance with a
different country code than countryCountryCode).
Default Value: 0
Yes