Specifications

Chapter 4 - apaUIGroup Parameters MIB Reference Manual - Provisioning MIB
VP500 Communication Unit 14
apaUIServices-
Group
apaUIService-
sPortnGroup
The following parameters allow you to define the services offered by
the VP500 communication unit.
apaUIServicesPortnCallForwardUnconditionalGroup
apaUIMapRulexPrefixDigit R/W Select the digits to prefix to the dialed number for Dial Map Rule
#n.
0 = Prefix Area code
1 = Prefix Country code
2 = Prefix Country code and Area code
Default Value: 2
Yes
Table 12: apaUIMapRulex Group Parameters (Continued)
Name Access Description Dynamic
Note: The following parameters only apply to access communication
units such as the AT-VP504E FXS.
Note: Each port of the VP500 communication unit has its own set of
parameters. The parameter description is identical for each port. For
clarity’s sake, only one generic set of parameters is described in this
manual. When browsing through the Provisioning MIB, replace the “n”
letter in the following parameters with the proper port number (from 1
to 4).
Table 13: Portn Call Forward Unconditional Parameters
Name Access Description Dynamic
apaUIServicesPortnCallForwardUnconditional
Enable
R/W Unconditionally enable the Call Forward on port #n.
0 = Disable
1 = Enable
Default Value: 0
Yes
apaUIServicesPortnCallForwardUnconditional
Address
R/W Address to which the phone call will be unconditionally forwarded.
Address format = 'userInfo@host:portNumber' where:
• userInfo = user name or telephone number
(optional)
• host = domain name or IP address
• portNumber = port number (optional)
Default Value:
Yes
apaUIServicesPortnCallForwardUnconditional
EnableStarNumber
R/W Digits to dial after the star key to unconditionally enable the Call
Forward.
Default Value: 25
Yes