Specifications

VP500 Communication Unit 11
3
apaManager Parameters
The apaManager Group parameters allow you to set information
pertaining to the Unit Manager, which is a module of the IP
Communication Server used to set and provision the VP500
communication units.
apaManager Basic
Parameters
The following parameters allow you to define basic information about
the Unit Manager the VP500 communication unit will use.
apaManagerStatic-
Group
The following parameters allow you to set static information pertaining
to the Unit Manager.
Table 9: Unit Manager Parameters
Name Access Description Dynamic
apaManagerEnable R/W Enable the Unit Manager.
0 = Disable
1 = Enable
Default Value: 1
No
apaManagerUseDhcp R/W Select the provenance of the Unit Manager configuration.
0 = Static
1 = DHCP
Default Value: 1
Yes
a
apaManagerTrapRetransmissionPeriod R-W TRAP retransmission period in ms.
Default Value: 60000
Yes
apaManagerTrapRetransmissionRetryCount R-W TRAP retransmission retry count:
• -1 = infinite - always retransmit
Default Value: 10
Yes
a. Only when at least one of the variables xxUseDhcp was set to 1 before starting the VP500 unit.
Table 10: Unit Manager Static Parameters
Name Access Description Dynamic
apaManagerStaticPrimHost R/W Static Unit Manager IP address or domain name.
Default Value: 192.168.0.10
Yes
apaManagerStaticPrimTrapPort R/W Static Unit Manager IP port number on which traps must be sent.
Default Value: 162
Yes