Specifications
Table Of Contents
- MIB Structure
- InterfaceGroup Parameters
- apaManager Parameters
- apaUIGroup Parameters
- gatewayGroup Parameters
- countryGroup Parameters
- portGroup Parameters
- syslogGroup Parameters
- tftpGroup Parameters
- apaByPassGroup Parameters
- apaSystemGroup Parameters
- apaCmdGroup Parameters
- snmpGroup Parameters
- apaInfoGroup Parameters
- configTrapGroup Parameters
- sntpGroup Parameters
- mgcpConfiguration Parameters
- sipUAGroup Parameters
- List of MIB Parameters
Chapter 1 - MIB Structure MIB Reference Manual
VP500 Communication Unit 4
types:
• R/W: the parameter is “Read/Write” and can be
edited.
• R-O: the parameter is “Read-Only” and cannot be
edited.
Description: Short description of the parameter as
displayed in the MIB. When possible, the default value for
the parameter is provided.
Dynamic: Describes the update status of the parameter,
which can have three update types:
• Dynamic (Yes): The parameter value is updated
automatically. You do not need to restart the
VP500 communication unit.
• Not dynamic (No): The parameter value is not
updated automatically. You must restart the
VP500 communication unit for the change to take
effect.
• Not Applicable (N/A): Applies to read-only
parameters.
MIB Version The following parameters give the current version of the Provisioning
MIB and the VP500 communication unit model involved.
Table 3: MIB Version Parameters
Name Access Description Dynamic
provisionningMibVersion R-O MIB version.
Default Value: 1.0
N/A
analogGatewayID R-O VP500 communication unit model.
0 = APA III-1
1 = APA III-4 FXS
2 = APA III-4 FXO
3 = APA III-4 FXS/FXO
Default Value:
N/A