Specifications

Chapter 9 - Miscellaneous Configuration Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 69
3. Set the following variables:
Configuring the
Syslog
Daemon
You must configure both your AT-VP504E FXS communication unit to
send Syslog messages and your Syslog daemon to capture those
messages.
To configure your AT-VP504E FXS:
1. Go to the Unit Manager and enter the level of messages you
want your AT-VP504E FXS to send.
2. Enter the IP address of the computer on which the Syslog
Daemon is running.
For more information, see your
IP Communication Server
Administration Manual
.
To enable your Syslog daemon to capture your AT-VP504E FXS
messages:
1. Refer to your Syslog daemon’s documentation to learn how
to properly configure it to capture messages.
SNMP Configura-
tion
The SNMP Group parameters allow you to set information pertaining
to the SNMP protocol
Table 29: Syslog Daemon Static Address
Variable Description
syslogStaticHost Syslog server static IP address or domain
name.
Default Value: 192.168.0.10
syslogStaticPort Syslog server static IP port number.
Default Value: 514
Table 30: SNMP Configuration Variables
Variable Description
snmpAgentPort SNMP Agent port number on which the unit
must listen for SNMP requests.
Default Value: 161