Specifications

Chapter 9 - Miscellaneous Configuration Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 68
• 1 = Critical errors
• 2 = Error conditions
• 3 = Warning conditions
• 4 = Informational messages
• 5 = Debug-level messages (use with care)
Higher level mask includes lower level masks, e.g.: Error
conditions (2) include Critical errors (1).
The default value is 4 = Informational messages.
DHCP vs. Static
Configuration
The Syslog daemon information can be assigned through a DHCP
server or set statically.
To use DHCP-assigned information:
1. Locate the syslogUseDhcp variable (under syslogGroup ).
This variable defines whether the AT-VP504E FXS must ask
for its Syslog daemon settings through a DHCP server or not.
2. Set the syslogUseDhcp variable to 1=DHCP.
You can query the Syslog daemon’s IP address and port
number assigned by the DHCP server in the
syslogDhcpHost
and syslogDhcpPort read-only variables.
3. Set the DHCP Vendor Specific code of the Syslog daemon in
the
syslogDhcpVendorSpecificCode variable.
This code can be any number between 0 and 254. The
default value is 110.
To use static information:
1. Locate the syslogUseDhcp variable (under syslogGroup ).
This variable defines whether the AT-VP504E FXS must ask
for its Syslog daemon settings through a DHCP server or not.
2. Set the syslogUseDhcp variable to 0=Static.