Specifications

Chapter 9 - Miscellaneous Configuration Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 67
To enable the VLAN configuration:
1. Locate the interfaceVlanIeee8021QTaggingEnable attribute
under the
interfaceVlanGroup of the Provisioning MIB.
2. Set the value of this parameter to 1 = Enable.
The VLAN configuration is enabled.
3. Locate the following attributes under the interfaceVlanGroup
of the Provisioning MIB:
• interfaceVlanIeee8021QVirtualLanID
• interfaceVlanIeee8021QDefaultUserPriority
4. Set the value of these attributes.
For more information, please refer to the
MIB Reference manual.
Syslog Daemon
Configuration
The AT-VP504E FXS can send administrative messages to the Syslog
daemon, which is a tool you can use to monitor events in the
AT-VP504E FXS. If no Syslog daemon address is provided by a DHCP
server or specified by the administrator, no messages are sent.
Why a Syslog
Daemon?
The Syslog daemon is a general purpose utility for monitoring
applications and network devices with the TCP/IP protocol. With this
software, you can monitor useful messages coming from your
AT-VP504E FXS communication unit.
For example, if you want to download a new software into the
AT-VP504E FXS, you can monitor each step of the software download
phase. Furthermore, if the unit encounters an abnormal behaviour, you
can sometimes see accurate messages that will help you troubleshoot
the problem.
To enable the Syslog daemon:
1. Locate the syslogMsgEnable variable (under syslogGrou p).
This variable enables the syslog daemon messages.
2. Set the syslogMsgEnable variable to 1=Enable.
3. Select a tracing mask option in the syslogTracingMask
variable.
Available values are:
• 0 = Absolutely no Tracing