Specifications

Chapter 7 - Port Configuration Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 58
Setting Country-
Specific Variables
The variables in the port1DspCountrySpecificGroup category can
change in different countries, so they need to be set according to the
AT-VP504E FXS location.
Note: You can repeat the same process for each port of the
AT-VP504E FXS.
Table 26: Country-Specific Variables
Variable Description
port1DspCountrySpecificGain
Configuration
Select the configuration to use.
• 0 = Use custom configuration
• 1 = Use default country
configuration
Default Value: 1
port1DspCountrySpecificGain
BaseInput
Country specific base input gain.
Default Value: 3648
port1DspCountrySpecificGain
BaseOutput
Country specific base output gain.
Default Value: 3029
port1DspCountrySpecificGain
BaseInputOffset
Country specific base input gain offset in
dB.
Default Value: 0
port1DspCountrySpecificGain
BaseOutputOffset
Country specific base output gain offset
in dB.
Default Value: 0
Note: You can repeat the same process for each port of the
AT-VP504E FXS.