Specifications

Chapter 4 - Network Configuration Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 42
Short: Has a size of 4 hexadecimal characters and
includes only the IP address. In this case, the default port
is used.
If the DHCP request fails or the address is not in the vendor specific
codes, the following applies:
1. If the DHCP value already in the MIB is valid, it is kept.
2. If not, the static value is used if valid.
3. If not, the default value is used.
Example
The following example shows how to enter the Syslog IP address
192.168.0.10 (with the default port used) and the same address at port
2545. The format is in hexadecimal.
Figure 11: Example – Short Address String
Figure 12: Example – Long Address String
Table 18: Address String Formats
Variable Valid Range Typical Value Note
IP Address Any valid IP
address
192.168.0.2 N/A
Port 1 - 32,768 162 Not present in the format
with dimension 4.
6E 04 C0 A8 00 0A
Vendor
Size IP Address
Specific
Code
6E 06 C0 A8 00 0A 09 F1
Vendor
Size IP Address
Port
Specific
Code