Specifications
Chapter 4 - Network Configuration Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 41
5. Click in the last line entered, then type in the Vendor Specific
Information you want to add.
A new line will be automatically created. Use one line for each
Vendor Specific information you want to add. You can enter
a maximum of 255 characters per line.
See “Entering IP Addresses” on page 41 for more details on
the syntax to use.
6. When you are done, click
OK
.
Table 17 lists the Vendor specific information you can set in
the DHCP server.
Entering IP Addresses
There are two formats of address string:
Long: Has a size of 6 hexadecimal characters and
includes the IP address and port.
Note: Firewall Information: the AT-VP504E FXS uses UDP port 5060.
Table 17: Vendor Specific Codes
Information MIB Variable Code
Default
IP Address Port #
Unit Manager apaManagerDhcpVendorSpecificCode 200 192.168.0.10 162
SIP Logging sipUALogDhcpVendorSpecificCode 202 192.168.0.10 6000
SIP Registrar
Server
sipUAServerDhcpRegistrarVendorSpecificCode 203 192.168.0.10 5060
SIP Proxy
Server
sipUAServerDhcpProxyVendorSpecificCode 204 192.168.0.10 5060
Syslog
Daemon
syslogDhcpVendorSpecificCode 110 192.168.0.10 514
TFTP Server tftpServerDhcpVendorSpecificCode 117 192.168.0.10 69
Emergency
TFTP Server
tftpServerDhcpEmergencyVendorSpecificCode 118 192.168.0.10 69
SNTP Server sntpDhcpVendorSpecificCode 208 192.168.0.10 123