Specifications

Chapter 4 - Network Configuration Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 37
Each of these IP addresses has its own configurable vendor
specific code. See “Creating Vendor Specific Information” on
page 39 for more details.
Verifying the DHCP-Assigned IP Addresses
You can query the Provisioning MIB to see what are the IP addresses
that have been assigned to the AT-VP504E FXS. Those IP addresses
are located under the
interfaceDhcpGroup of the Provisioning MIB in
read-only variables.
Using Static
Configuration
Using static IP addresses allows you to bypass the DHCP or still be
able to use the AT-VP504E FXS if you are not running a DHCP server.
To use Static configuration:
1. Locate the interfaceUseDhcp variable ( InterfaceGroup
category) in the Provisioning MIB.
This variable indicates the origin of the configuration IP
addresses.
2. Set the variable to 0, Static.
3. Locate the interfaceStaticGroup category.
This category contains the IP addresses that you can set.
4. Set the IP address of the above variables.
Default IP addresses are already provided.
Note: You can also see the DHCP server IP address in the read-only
variable
interfaceDhcpServerIp .
Table 15: IP Addresses to Set
IP Address Variable
AT-VP504E FXS IP address interfaceStaticLocalIp
Subnet Mask interfaceStaticSubnetMaskIp
Default Router IP address interfaceStaticDefaultRouterIp
Primary DNS IP address interfaceStaticPrimDnsIp
Secondary DNS IP address interfaceStaticSecDnsIp