Specifications

Chapter 4 - Network Configuration Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 36
To use DHCP configuration:
1. Locate the
interfaceUseDhcp
variable (
InterfaceGroup
category) in the Provisioning MIB.
This variable indicates the origin of the configuration IP
addresses.
2. Set the variable to 1, DHCP.
This is the default value.
3. Reboot the AT-VP504E FXS.
The AT-VP504E FXS will not make a DHCP request in the
following cases:
If all MIB variables
xxUseDhcp
are set to 0=False
at start-up.
If one of these variables is set to 1=True after the
initialization process.
Table 14 lists the network variables that can be assigned via
DHCP by using their vendor specific code.
Table 14: DHCP-Provided IP Addresses
IP Address Description
Unit Manager Uses the value via DHCP if
apaManagerUseDhcp
is set to 1.
SIP User Agent Log Uses the value via DHCP if
sipUALogUseDhcp
is set to 1.
SIP Registrar Server Uses the value via DHCP if
sipUAServerUseDhcp
is set to 1.
SIP Proxy Server Uses the value via DHCP if
sipUAServerUseDhcp
is set to 1.
Syslog Uses the value via DHCP if
syslogUseDhcp
is set to 1.
TFTP Server Uses the value via DHCP if
tftpUseDhcp
is
set to 1.
Emergency TFTP Server Uses the value via DHCP if
tftpUseDhcp
is
set to 1.
SNTP Server Uses the value via DHCP if
sntpUseDhcp
is
set to 1.