Specifications

Chapter 2 - Installation Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 18
TCP/IP network access (e.g. router, switch, hub or
computer).
You must also install the IP Communication Server
1
on a
machine accessible by the network in order to take full
advantage of the AT-VP504E FXS. Please refer to the IP
Communication Server Manual for more details on how to
install and configure it.
3. Connect a SCN line into the Bypass port of the AT-VP504E
FXS (optional).
4. Connect the power supply to the AT-VP504E FXS and then
connect the power cable to an electrical outlet.
5. Turn the AT-VP504E FXS on.
Figure 7: Steps for Connecting the AT-VP504E FXS Hardware
1. Only valid for units that run the SIP signalling protocol.
Warning: The electrical outlet shall be installed near the AT-VP504E
FXS so that it is easily accessible.
3
1
4
2