Specifications

Chapter 2 - Installation Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 16
Figure 6: Fitting the wall bracket for wall-mounting
Table 8 describes the wall-mounting pieces illustrated in Figure 6.
9. Insert the four screws into the screw holes, and tighten.
10. Place the wall-mounting bracket on the wall and place the
screw holes of the wall-mounting bracket over the screws
installed in step 4.
E
D
C
B
A
Table 8: Wall-Mounting Pieces
Item Qty. Description
A 1 AT-VP504E FXS casing
B 4 6 x 32 UNC 1/2 steel philips binding head screws
C 1 Wall-mounting bracket
D 4 6 bolt size split lock washers
E 4 6 x 32 5/16 across 7/64 thick steel Hex machine screw
nuts
Note: Ensure that the AT-VP504E FXS’s front faces the sides or the
top. Do not position the front of the AT-VP504E FXS downward. If
the AT-VP504E FXS’s front faces downwards, the wall-mounting
bracket is not installed properly. See step 3.