Specifications

Chapter 2 - Installation Administration Manual (SIP/MGCP Version)

AT-VP504E FXS 13

Mounting the

AT-VP504E

FXS

Rack-Mounting the AT-VP504E FXS

The AT-VP504E FXS is 5.5 cm (2.2 in.) high and fits in most standard

48.26 cm (19 in.) racks. Allied Telesyn recommends that you use a

rack compliant EIA-310-D.

To rack-mount the AT-VP504E FXS:

1. Disconnect all of the cables from the AT-VP504E FXS.

2. Remove all of the rubber feet from the AT-VP504E FXS, if

applicable.

3. Place the AT-VP504E FXS right side up on a hard flat

surface, with the front facing toward you.

4. Place the left mounting bracket over the mounting holes on

the left side of the AT-VP504E FXS. Figure 4 illustrates the

rack-mounting pieces.

Figure 4: Rack mounting

pieces

Table 7 describes the rack-mounting pieces illustrated in Figure 4.

Table 7: Rack-Mounting Pieces

Item No. Qty. Description

A 1 AT-VP504E FXS casing