Specifications

Chapter 2 - Installation Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 12
Package Contents Your AT-VP504E FXS package contains the following items:
the AT-VP504E FXS communication unit
4 rubber feet for the AT-VP504E FXS
a power supply for the country in which you will be using
the AT-VP504E FXS
a CD that contains an Administration Manual, a MIB
Reference Manual, a User’s Manual and an IP
Communication Server Manual
a Quick Start booklet
Choosing a Suita-
ble Installation Site
The AT-VP504E FXS is suited for use in an office environment where
it can be wall-mounted, mounted on a standard 48.26 cm (19 in.)
equipment rack, or free standing on its rubber feet. In addition, the
AT-VP504E FXS can be rack-mounted in a wiring closet or equipment
room.
When deciding where to position the AT-VP504E FXS, ensure that:
The AT-VP504E FXS is accessible and cables can be
easily connected.
The cabling is away from the following:
• Sources of electrical noise such as radios,
transmitters, and broadband amplifiers
• Power lines and fluorescent lighting fixtures
• Water or moisture that could enter the casing of
the AT-VP504E FXS.
The airflow is not restricted around the AT-VP504E FXS
or through the vents in the side of the unit. It is necessary
to have a minimum of 25 mm (1 in.) clearance.
The fan on the AT-VP504E FXS is not blocked or that the
back of the unit is not too close to the wall.
No more than four (4) AT-VP504E FXS units are placed
on top of one another, if the units are free standing.
Note: The wall-mounting or rack-mounting kit is not part of the
standard AT-VP504E FXS package and must be ordered separately.