Specifications

Chapter 1 - Getting Started Administration Manual (SIP/MGCP Version)

AT-VP504E FXS 8

MIB Structure The current Allied Telesyn MIB structure has three individual MIB

modules:

Figure 3: MIB Structure

All parameters in the MIBs have been configured by default upon start

up. However, if you need to modify some of these parameters (for

example, parameters related to the country in which you are), use a

SNMP browser.

Changing a

Parameter

Value

Modifying a parameter involves contacting the AT-VP504E FXS

communication unit with any SNMP MIB browser. Be sure to use the

MIB modules that match the version of those located inside the current

software build of the unit.

You can use the built-in SNMP editor of the Unit Manager. See the

Communication Server Administration Manual

for more details. You

can also use the Unit Manager Express, a free MIB browser located on

the documentation CD provided with your AT-VP504E FXS

communication unit.

Table 5: Allied Telesyn MIB Structure

MIB Description

Provisioning MIB Allows you to set up all the parameters related to the

AT-VP504E FXS communication unit. The

Provisioning MIB contains all the functional

parameters the unit uses to operate.

MGCP MIB Used exclusively with AT-VP504E FXS

communication units that run the Media Gateway

Control Protocol (MGCP).

SIP MIB Used exclusively with AT-VP504E FXS

communication units that run the Session Initiation

Protocol (SIP).