Specifications

Appendix B - Safety & EMI Certifications Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 126
The REN is useful to determine the quantity of devices you may
connect to your telephone line and still have all of those devices ring
when your telephone number is called. In most, but not all areas, the
sum of the REN’s of all devices connected to one line should not
exceed five (5.0). To be certain of the number of devices you may
connect to your line, as determined by the REN, you should contact
your telephone company to determine the maximum REN for your
calling area. If your telephone equipment causes harm to the telephone
network, the Telephone Company may discontinue your service
temporarily. If possible, they will notify you in advance, but if advance
notice is not practical, you will be notified as soon as possible. You will
be informed of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the proper
functioning of your equipment. If they do, you will be notified in advance
to give you an opportunity to maintain uninterrupted telephone service.
If you experience trouble with this telephone equipment, please
contact Allied Telesyn for information on obtain service or repairs. The
telephone company may ask that you disconnect this equipment from
the network until the problem has been corrected or until you are sure
that the equipment is not malfunctioning.
This equipment may not be used on coin service provided by the
telephone company.
Connection to party lines is subject to state tariffs.
INSTALLATION
This device is equipped with an USOC RJ-11C connector.
Industry Can-
ada
The Industry Canada Label identifies certified equipment. This
certification means that the equipment meets telecommunications
network protective, operational and safety requirements as prescribed
in the appropriate Terminal Equipment Technical Requirements
document(s). The Department does not guarantee the equipment will
operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed
using an acceptable method of connection. The customer should be
aware that compliance with the above conditions may not prevent
degradation of service in some situations.