Specifications

Chapter 13 - Signalling Protocol Configuration – MGCP Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 116
2. Set the following variables:
Viewing Status
Parameters
The MGCP MIB offers various read-only status information that can be
queried. These variables are located under the
mgcpStatusGroup
category.
Table 54: MGCP Line Package Information
Variable Description
mgcpConfigurationLine
PackageBzDuration
Busy tone timeout value in ms.
Default Value: 30000
mgcpConfigurationLine
PackageDlDuration
Dial tone timeout value in ms.
Default Value: 16000
mgcpConfigurationLine
PackageRgDuration
Ring tone timeout value in ms.
Default Value: 180000
mgcpConfigurationLine
PackageSlDuration
Stutter dial tone timeout value in ms.
Default Value: 16000
mgcpConfigurationLine
PackageOtDuration
Off hook warning tone timeout value in ms.
Default Value: 65535000
Table 55: MGCP Status Parameters
Variable Description
mgcpStatusProtocolVersion Version of the MGCP protocol.
mgcpStatusStackVersion Version of the MGCP stack.
mgcpStatusCallAgentAddress The address of the Call Agent to which
the unit is currently registered.
Default Value: 0.0.0.0
mgcpStatusCallAgentPort
Number
Port number of the Call Agent.
Default Value: 0