Specifications

Chapter 13 - Signalling Protocol Configuration – MGCP Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 112
Configuring End-
points
Endpoints are originating or terminating devices such as phones or
faxes.
To set endpoints information:
1. In the MGCP MIB, locate the mgcpConfigurationEpIdGroup
category.
This group contains the endpoint information you must set.
2. Set the following variables:
Setting up
Retransmission
Parameters
Retransmission is a method of error control in which hosts receiving
messages acknowledge the receipt of correct messages and do not
acknowledge the receipt of incorrect messages. The lack of
acknowledgement is an indication to the sending host that it should
transmit the failed message again.
To set Retransmission information:
1. In the MGCP MIB, locate the mgcpConfiguration
RetransmissionGroup
category.
This group contains the retransmission information you must
set.
Table 50: MGCP Endpoint Information
Variable Description
mgcpConfigurationEpIdLocal
NameTerm1
String that specifies the term of the
endpoint name.
Default Value: aaln
mgcpConfigurationEpId
GatewayFqdnUseDns
Select the provenance of the Fully
Qualified Domain Name (FQDN).
•0 = Static
• 1 = DNS
Default Value: 0
mgcpConfigurationEpIdStatic
GatewayFqdn
Static Fully Qualified Domain Name
(FQDN) of the unit.