Specifications

Chapter 13 - Signalling Protocol Configuration – MGCP Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 111
To use static information:
1. In the MGCP MIB, locate the mgcpConfigurationCallAgent
UseDhcp
variable (under mgcpConfigurationCallAgent
Group
).
This variable defines whether the AT-VP504E FXS must ask
for its Call Agent settings through a DHCP server or not.
2. Set the mgcpConfigurationCallAgentUseDhcp variable to
0=Static.
3. Set the following variables:
Table 49: MGCP Call Agent Static Address
Variable Description
mgcpConfigurationCallAgent
StaticPrimaryAddress
Primary static Call Agent address. Can
be a dotted IP string or a FQDN
address.
Default Value: 192.168.0.10
mgcpConfigurationCallAgent
StaticPrimaryPortNumber
Primary static Call Agent UDP port
number.
Default Value: 2727
mgcpConfigurationCallAgent
StaticSecondaryAddress
Secondary static Call Agent address.
Can be a dotted IP string or a FQDN
address.
Default Value: 192.168.0.10
mgcpConfigurationCallAgent
StaticSecondaryPortNumber
Secondary static Call Agent UDP port
number.
Default Value: 2727